The SJ-N Film Blowing machine/Plastic Blowing Machine/Extruder is used to produce the mulch plastic film, agricultural film and outer package film made of low density polyethylene (LDPE), high density polyethylene (HDPE), linear low density polyethylene (LLDPE) and metallocene linear low density polyethylene (LLDPE). It employs some new technologies like the most advanced heat running technology and special wind ring that is used to extrude the shaped mulch plastic film. The machine is designed reasonably and elegantly. It is small and is easy to operate and maintain. The product features with good plasticization, high physical and mechanical performance and strong tear resistance. With advanced technology and reasonable accessories, the machine is featured by high output, low energy consumption, good stability and reliability etc. Therefore, it is the ideal equipment to agricultural mulch plastic film in the new century.

MODEL NO.		SJ 65 -FM S1500N	SJ75-FMS1700N	SJ90-FMS2000N
LAYER NUMBER		1
MAX.FILM WIDTH	mm	1400	1600	1900
FILM THICKNESS	mm	0.015 0.20	0.020 0.25
OUTPUT	kg/h	65	80	100
RAW MATERIAL		HDPE,LDPE,LLDPE
EXTRUDER
SCREW DIAMETER	mm	Φ65	Φ75	Φ90
SCREW L/D		30:1	28:1	25:1
HEATER CAPACITY	kw	16.5	20.7	24.4
DRIVING MOTOR	kw	30	37	45
DIE:
DIE DIAMETER	mm	LDPE Φ 350	LDPEΦ400	LDPEΦ500
LD&HD FREE CHOICE		HDPEΦ90Φ120	HDPEΦ110Φ150	HDPEΦ125Φ175
HEATER CAPACITY	kw	LDPE 9.95	LDPE11.35	LDPE14.3
		HDPE:6.1	HDPE: 6.8
COOLING AIR BLOWER	kw	4	5.5
HAUL-OFF:
DRIVING MOTOR	kw	2.2
TAKE-UP SPEED	m/min	10 50
WINDER DRIVE MOTOR	kw	6.6	8.5
TEMPERATURE CONTROL	point	6		7
WHOLE POWER WITH TOTAL MACHINE	kw	~ 70	~ 84	~ 100
SHAPE SIZE	m	6.7 X 3.2 X 5.5	7.3 X 3.5 X 6.0	8.0 X 4.0 X 7.0
WEIGHT	t	~ 4.5	~ 5.5	~ 7.0

Design and specification are subject to change without notice!